Article List
- Differences between primary and secondary molding film faced plywoodWhat is primary and secondary molding”?When we purchase film faced plywood (building formwork), we usually face the selection of“One time hot press or Two times hot press”.One time hot press refers to primary moldingTwo times hot press refers to secondary moldingThe so-called primary and secondary mNews&Article November 05, 2019
- PLYWOODPlywood is a composite material, although we often consider it as a traditional working material. It is composed of individual plies / veneers of wood. It is very strong due to the way the plies are put together. The grain of each ply is positioned at ninety degrees to the pieces of ply above and beNews&Article October 28, 2019
- Plywood Surface Wood Veneer Grading RulesPlywood surface wood veneer grading rules differ according to the country of origin. The most popular standards are the British Standard (BS) and the American Standard (ASTM). Joyce (Joyce, Ernes. 1970. The Technique of Furniture Making. London: B. T. Batsford Limited.), however, list some general iNews&Article October 26, 2019
- How to identify the quality of the PVC Edge Banding Tape？When the proportion of calcium carbonate is high, the physical properties are unstable, the PCV edge banding will be easily broken and fade color. High-quality PVC edge banding, due to the high proportion of PVC components, product stability is very high, then it will not be easily broken and fade colorNews&Article October 17, 2019
- Different Glue Types of Marine PlywoodWhat is the difference between Phenolic WBP, Melamine WBP and Mr glue? Quality is different, Phenolic WBP glue plywood can be used more than 20times, Melamine WBP glue plywood can be used 6~10times. MR glue plywood can be used 2~4times. Phenolic WBP can bear 72 hours in boiling water, Melamine WBPNews&Article July 18, 2019
- Indoor Decoration, OSB or Plywood?According to the building code, OSB (Oriented Strand Board) and plywood can be used interchangeably and both are referred to as "structural wood panels" because both OSB and plywood are bonded to the wood and formed at high temperatures and pressures. Although there are obvious similarities, there aNews&Article July 17, 2019
- How to Select Plywoods?The following points should be mastered when selecting:(1) Plywood has the difference between the front and the back. When selecting, the plywood should be clear in wood grain, smooth and smooth on the front, not rough, and should be flat.(2) Plywood should not be damaged, broken, insects, nail holeNews&Article July 16, 2019
- The Harm of Formaldehyde to HumansThe renovated room always has a pungent smell, and the stay is a little longer. People will have dizziness, glare, sore throat, chest tightness and other adverse reactions, which is mostly a visual manifestation of formaldehyde damage. According to statistics, there are different levels of air polluNews&Article July 16, 2019
- Why to Choose UV Coated Boards?The UV coated board is one kind of board(plywood&MDF&Particle board) whose surface is protected by UV treatment. The surface is bright, wear-resistant, chemically resistant, long-lasting, and resistant to moisture and deformation.The UV color is complete, can be made according to the color specifiedNews&Article July 17, 2019
- Plywood vs MDFWhat is plywood?Plywood is a sheet made of glue applied to the splicing wood. The surface of the board is flat and easy to process.Plywood is a three-layer or multi-layered plate-like material which is formed by cutting a wooden section into a veneer or by cutting into a thin wood by wood, and thenNews&Article July 18, 2019