Difference between partical board and MDF

1. Different Materials

 The wardrobe panels on the MDF market mainly use man-made panels, while solid wood is rarely used. Artificial board is divided into plywood, particle board , fiberboard, solid wood multilayer board, among which fiberboard has high density, medium density and low density. It is a board made of wood fiber or other plant fiber powder, prepared by fiber, applied with synthetic resin, and pressed under heating and pressurizing conditions. Easy to swell in contact with water. Therefore, the cabinet cannot be made, and because of its poor nail-eating ability, manufacturers of good quality do not use MDF as the cabinet.

  Particleboard is made of wood or other lignocellulosic materials. It is a man-made board that is glued under the action of heat and pressure after applying an adhesive, also known as particle board. It retains more of the natural structure of wood, the expansion rate is 8%-10% when immersed in water, and the nail-eating ability is good. Therefore, from the current situation, it is the most suitable cabinet for furniture manufacturing and construction industry. Manufacture of train and automobile carriages.

2. Different Purposes

MDF is mainly used for laminate flooring, door panels, partition walls, furniture, etc. It is mainly used for surface treatment of oil mixing process in home decoration. It is not suitable for cabinets. Particleboard can be painted and various veneers, and can also Do the cabinet. Furniture vhe construction industry and train and automobile carriage manufacturing. Good sound absorption and sound insulation, flat surface, small thickness error, pollution resistance, aging resistance, paint and various veneers.

3. The Scope Of Application Is Different

 Due to its uniform and fine internal structure, MDF is widely used to replace wood processing patterns and carving products, while particleboard is widely used in the panel furniture industry due to its resistance to bending and deformation, high strength-to-weight ratio, good nail holding power and low formaldehyde content.

4. The Environmental Protection Coefficient Is Different

Since a large amount of glue is used in the production process of density board, if the quality of the glue is not good enough, it is likely that the formaldehyde of the density board will be too high, and the environmental protection factor of the particle board will be much higher.

5. Different Nail Holding Power

 Density board is composed of powder, which is easy to swell when exposed to water and has poor nail-holding ability. Particleboard has the characteristics of wood and has a certain nail-holding power, which can be repeated about 10 times under normal circumstances.