News&Article
- The difference between OSB and Partical Board"OSB" core board is Oriented Strand Board (Oriented Strand Board), or OSB for short. It is also called "Ou Song board" on the market. It is a kind of fresh wood with a large diameter and straight trunk as raw material.News&Article July 25, 2020
- Partical BoardParticle board is also called bagasse board. It is made of wood or other lignocellulosic materials. After applying adhesive, it is glued under heat and pressure. Mainly used in furniture manufacturing, construction industry, train and automobile carriage manufacturing. Because the particle board hasNews&Article July 23, 2020
- The structure and purchase skills of panel furnitureThe combination of panel furniture is usually connected by various metal hardware, which is convenient for transportation. Because the base material breaks the original physical structure of the wood, when the temperature and humidity change greatly, the deformation of the wood-based panel is much bNews&Article July 21, 2020
- Particleboard furniture performanceMoisture resistance of particleboard furniture The moistureproof performance of particleboard furniture is mainly concerned with its internal structure. Observing the cross section of particleboard, it can be found that the inside of the particleboard has three layers: the outer two layers have smalNews&Article July 14, 2020
- Advantages of ash furniture and MDF furnitureAdvantages of Manchurian furniture:Advantage 1: cut surface is very smooth, paint and stickier can also be very good.Suitable for dry climate, and very slight aging, little performance change.Advantage 2: from the other performance of furniture of Ash, ash adapt to the performance of processing is aNews&Article July 17, 2020
- Introduction of Furniture MaterialsType of substrate 1. Plywood : Production: It is made by hot pressing of three or more layers of one millimeter thick veneer or thin plate glue.Alias: thin core board.Features: not easy to deform, good water resistance.Glue: Use less glue. 2. Particle board : Production: Scraps made of wood or otheNews&Article July 18, 2020
- Advantages of Panel FurnitureAdvantages of the panel furniture Panel furniture is made from artificial boards. Common artificial boards include plywood, MDF, particle board, PVC foam board, etc. Advantages of panel furniturea. The most obvious advantage, panel furnitures can be disassembled and assembled at will, with rich shNews&Article July 10, 2020
- MDF and ApplicationsMDF is called the Medium Density Fiberboard, which is made of wood fiber or other plant fiber, prepared by fiber, applied with synthetic resin, and pressed under the condition of heat and pressure.According to its density,News&Article July 11, 2020
- Definition of plastic formwork/ film faced plywoodPlastic formwork is an energy-saving and environmentally friendly product. It is a new type of replacement product after wood formwork, combined steel formwork, bamboo-wood glued formwork, and all-steel large formwork. It can completely replace the traditional steel formwork, wooden formwork, squareNews&Article July 08, 2020
- Definition panel furniture and solid wood furnitureWhich is better? Panel furniture or solid wood furniturePanel furniture and solid wood furniture are distinguished from the following two aspects:First, production materials:Solid wood furniture refers to pure solid wood furniture, all materials are natural materials that have not been reprocessed.News&Article July 08, 2020